3Km Long Range Wireless Outdoor CPE, WIFI Router, 5.8Ghz 900Mbps Repeater Extender
CPE450M is a long range high performance 11ac outdoor CPE with 900Mbps data rate. Comply with IEEE 802.11b/g/n/ac standard, 27dBm RF power, 14dBi dual polarized high gain antenna, the PTP/PTMP distance is more than 4000 meters.
It support Wireless AP, Wireless Bridge operation mode for PTP/PTMP connections, with operation switch on device, easy to setup CPE450M’s operation mode, no need to access into GUI, avoid the complex setup program, then simple to view the signal strength by LED signal lights, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
CPE450M with ABS waterproof, dustproof and sunscreen shell, temperature adaptive also; Meantime, it support 24V or 48V PoE, ESD protection and surge protection, ideal for outdoor use;
Most Important, CPE450M support watchdog self-detection function, reboot and recover device automatically if some network attack. Besides that, it support cloud remote management and software AC controller, administrator can monitor the working status, upgrade firmware, reboot, timed reboot device through cloud server, recover and maintain device at any time and any location, operator level outdoor PTP/PTMP connection equipment.
High Power and High Gain Antenna for morerange
Designed in Power Amplifier on PCB board, the power can be 300mW high power, 14dBi MIMO high gain antenna, greatly increase the Wi-Fi range to 3KMs distance and supply the stable Wi-Fi signal for users.
Multiple Operation Mode
CPE450M support Wireless AP, Wireless Bridge operation mode, effective solution for PTP, PTMP application and outdoor long range Wi-Fi coverage application.
Power over Ethernet
CPE450M has integrated passivePower over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
HI-MAX TDMA Support
CPE450M support HI-MAX TDMA Technology, use polling to solve the hidden node and resource waste problem between the CPE and base station, provide low latency, high throughput in PTP/PTMP application like IP camera wireless monitoring, long range Wi-Fi Transmission.
Access Controller System & Cloud Management System
With Access Control System under AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore….
Then work with Cloud Management System, easy to do central and remote management, advertisement and multi authentication make this AP more professional in WiFi Projects.
Comply with IEEE 802.11ac/a, 5G,900Mbps Data Rate
1 10/100/100Mbps WAN Port,1 10/100Mbps LAN Port
300mW high power, build in 14dBi MIMO panel antenna, stronger signal strength, more wireless coverage
Support passive PoE
Support SSID broadcasting, Multi SSID up to 4
Support Wireless AP, Repeater operation mode
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment
Support DDNS, VPN pass through, Port forwarding and DMZ host
Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
The working diagram between CPE450M and IP Camera
|With Modem Function||
|Wired Transfer Rate||
|Number of USB Interfaces||
|Wi-Fi Supported Frequency||
|5G Wi-Fi Transmission Rate||
|Standards And Protocols||
|Wi-Fi Transmission Standard||
|2.4G Wi-Fi Transmission Rate||
|Max. LAN Data Rate||
900mbps wireless cpe router
point to point 1-2km cpe router
Outdoor AP Router
outdoor 150mbps wireless cpe router
300mbps wireless repeater
wifi Bridge Client
extend wifi signal